Citizen Kei
Member
Thanks a lot! Parts are so rare than I'm ready to pay for the whole kit and use just one spring. I'm located in Canada and shipping certain parts from US can be complicated because of their arms parts restrictions, so I need to ask someone to do the paperwork for me etc. But the same website has the following kit, https://www.primarytactical.com/product/sako-extractor-ejector-complete/ which looks to be the same as https://www.midwestgunworks.com/page/mgwi/prod/s584s240 (obviously the latter is sold out!!!) so if I can get that, it would be perfect. Waiting for a reply from the vendor.You will get alot of stuff you don't need and will not fit. Out of a T3x bolt head parts kit only the ejector spring, extractor spring and extractor plunger fit the M995. After thinking about it you might experience difficulties finding the spring alone. Here in Finland we have the privilege of throwing an email at the factory and getting a bag full of springs, but you may be limited to the premade "spare part kits", which come with all kinds of extras you don't need. If you must buy the whole lot I suggest you look for a TRG or Tikka M595/695 kit.
I did a quick google search. This is more like it, but this one too has one extractor claw that you don't need/can't use. All the rest should fit: https://www.rebelgunworks.com.au/products/tikka-m558-m658-m590-m690-m595-m695-spart0160
Apologies for hijacking the thread as it doesn't really relate to the original topic in this thread!