• Hey All! Lately there has been more and more scammers on the forum board. They register and replies to members requests for guns and/or parts or other things. The reply contains a gmail or hotmail address or similar ”anonymous” email addresses which they want you to reply to. DO NOT ANSWER ANY STRANGE MESSAGES! They often state something like this: ”Hello! Saw your post about purchasing a stock for a Safari. KnuckleheadBob has one. Email him at: [email protected]” If you receive any strange messages: Check the status of whoever message you. If they have no posts and signed up the same day or very recently, stay away. Same goes for other members they might refer to. Check them too and if they are long standing members, PM them and ask if the message is legit. Most likely it’s not. Then use the report function in each message or post so I can kick them out! Beware of anything that might seem fishy! And again, for all of you who registered your personal name as username, please contact me so I can change it to a more anonymous username. You’d be surprised of how much one can find out about a person from just a username on a forum such ad our! All the best! And be safe! Jim

Sako TRG M10 Rifle System

Sako Collectors Club Discussion Forum

Fedsys

Member
Hi,

My name is Paul and I recently purchased a Sako TRG M10 rifle system. I have 3 calibers including a 308, 300 Win Mag, and a .338 Lapua Mag.

The bolt handle on the .338 Lapua Mag action is broken (cracked during shipping) and I have been trying to find a replacement. The TRG M10 bolt handles are different from the TRG rifles. The dealer who sold me the M10 sent me a TRG bolt handle and it is not a good fit….

Any advice?

Thanks,
Paul
 

Attachments

  • Sako TRG M10 Rifle System
    IMG_0356.jpeg
    149.5 KB · Views: 14
  • Sako TRG M10 Rifle System
    IMG_0357.jpeg
    93.8 KB · Views: 14
  • Sako TRG M10 Rifle System
    IMG_0358.jpeg
    83.7 KB · Views: 14
  • Sako TRG M10 Rifle System
    IMG_0361.jpeg
    116 KB · Views: 14
  • Sako TRG M10 Rifle System
    IMG_0360.jpeg
    112.9 KB · Views: 14
  • Sako TRG M10 Rifle System
    IMG_0359.jpeg
    113.9 KB · Views: 14
Off the top of my head I could have sworn the A1 bolt handle would fit, but looks like it doesn't. I'd contact the dealer to get the correct part.
 

Latest posts

Back
Top